Samsung SMT-190Dx User Manual page 53

USER'S MANUAL USER'S MANUAL USER'S MANUAL
System ID : 0 ~9

0
1



5
6
7
Move
1. Press the MENU and / button to select the
Setup menu.
. Press the ENTER or  button.
. Press the / and ENTER button to select the
System ID.
. Press the / and ENTER button to select the
setting you want. (0~9)
5. Press the MENU or  button repeatedly to exit.
Note
You must set the same SYSTEM ID of the DVR menu
and LCD menu to use system ID function.
and set the same SYSTEM ID for the remote
controller too. If the SYSTEM ID of the DVR menu is
differ from the LCD menu's, the remote controller may
not operate properly. Set the SYSTEM ID of the LCD
menu at LCD menu > Setup Menu > System ID.
Press the number button that you want on the remote
controller while SYSTEM ID button is pressed for
setting the SYSTEM ID of the remote controller.
 Reset : Image, Color - VGA mode only
Language
Transparancy : Medium
System ID
Reset
Move
System ID
Enter Return
Setup
: English


: 0


Enter Exit
Image Reset
Color Reset
Move
If you didn't select VGA input, this menu is not
available.
1. Press the MENU and / button to select the
Setup menu.
. Press the ENTER or  button.
. Press the / and ENTER button to select the
Reset.
. Press the / and ENTER button to select the
setting you want.
Move
5. Press the / and ENTER button to selelct the
OK or Cancel.
6. Press the MENU or  button repeatedly to exit.
Eng-5
Enter
Image Reset
Cancel
OK
Enter Return
Reset
Return