Table of Contents
Advertisement
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
Intended Audience
This guide is intended for people who are responsible for plan-
ning, configuring, administering, and operating the Limitless™
Network.
Prerequisite Skills
It is assumed that you are familiar with the operation of Limit-
less™ Networks.
About this Document
This document outlines professional installation requirements
for the Limitless™ Receiver, WMPR Series. Professional instal-
lation is required to comply with certification agency and legal
requirements. This document must be adhered to for all instal-
lations of the Limitless™ Receiver, WMPR Series.
These devices are not intended for critical control where there
is a single point of failure or where single points of failure result
in unsafe conditions. As with any process control solution, it
is the end users' responsibility to weigh the risks and benefits
to determine if the products used are the right match for the
application based on security, safety, regulations, and perfor-
mance.
References
The following list identifies all documents that may be sources
of reference for material discussed in this publication.
Document title
WMPR0003000700100100.eds
WMPR0003000700100100_V210.eds
Limitless™ WMPR Series Wireless Multi-Protocol
Receiver EtherNet/IP™ Object Model
1 | PRODUCT DESCRIPTION
1.1 | General
The Limitless™ Series uses the latest commercial off-the-
shelf wireless technology that can be used in a wide variety
of applications. This is especially beneficial for remote
monitoring applications where previous wiring installation or
wire maintenance was not physically possible or economically
feasible. This document will provide installation instructions to
properly install a Limitless™ Wireless Multi-Protocol Receiver
WMPR, as well as a detailed understanding of its functions.
1.2 | Principle of Operation
A Limitless™ input sends an RF signal to the WMPR when
the Limitless™ digital or analog input changes state. There
may be up to 14 Limitless™ digital or analog inputs that
communicate and indicate their state to a single WMPR. The
WMPR receiver is menu driven through the use of function
buttons and a easy to read LCD display. The menu allows you to
see status of the nodes, configure nodes, and update receiver
functionality. A change of state of a Limitless ™ input will cause
a corresponding change in output of the particular node to be
output via an EtherNet/IP™ output. The WMPR indicates low
battery conditions, lost RF links, as well as other diagnostic and
functional operations described in further detail throughout
this manual.
Document No.
Product Usage
Contact Honeywell
GEN code Version 1 only
Contact Honeywell
GEN code Version 2 only
32308916
ALL
ISSUE B
32309669
Sensing and Internet of Things
1
Advertisement
Table of Contents
