Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elura SUBB8.2
Summary of Contents for Elura SUBB8.2
- Page 3 5. PHASE SWITCH. This switch is used to set the subwoofer’s phase between normal “0°” Remove the Elura SUBB8.2/SUBB10.2 from its or reverse “180°” (out of phase). Once you determine the placement of the Elura SUBB8.2/ packing carefully and inspect it for any shipping SUBB10.2, you will need to set this switch for the best bass output for your listening position.
- Page 4 The main thing to remember is that without compromising the effectiveness of your there is no “right” or “wrong” place to put the Elura SUBB8.2/SUBB10.2. It all depends on how main stereo speakers.
- Page 5 (check your receiver’s owner’s manual). Set the subwoofer’s crossover to 150Hz. 6. You are now ready to put your Elura SUBB8.2/SUBB10.2 subwoofer into use. Skip to “E – INITIAL LISTENING TEST.”...
- Page 6 5. Connect your main speakers to the speaker terminals on the back of your power amplifier. 6. You are now ready to put your Elura SUBB8.2/SUBB10.2 subwoofer into use. Skip to “E – INITIAL LISTENING TEST.” FIG.4 –...
- Page 7 LINE IN sockets on the back of the Elura SUBB8.2/SUBB10.2. Make sure that left is connected to left and right is connected to 3. Turn on your stereo/home theater system. THEN turn on the Elura SUBB8.2/ right. SUBB10.2. Confirm that the subwoofer’s blue POWER indicator is glowing. If it 3.
- Page 8 2. Reposition your subwoofer. At some points in Dimensions (including feet) the room, its output may be cancelled by the Elura SUBB8.2: 12.8˝ H x 11.8˝ W x 11.8˝ D geometry of the room. Moving the Elura (325mm H x 300mm W x 300mm D) www.elura.audio...
Need help?
Do you have a question about the SUBB8.2 and is the answer not in the manual?
Questions and answers