S-Video/Component Video Connections (For Dvd); Stereo Connections - Samsung DVD-V8080 Instruction Manual

S-Video/Component Video Connections (for DVD)

Use the S-Video or Component Video connection method only for
the DVD player. The tuner and VCR can still be viewed through the
RF or line inputs.
To activate your alternative (S-Video or Component) video
selection, follow the "Alt Video Out" instructions on page 33.
Keep in mind that you can choose either S-Video or Component
1
only, but not both.
A superior video quality can be obtained when watching a DVD on
your DVD-VCR if your TV is equipped with S-Video or Component
To S-Video Input on Your TV
Video inputs.
1 Connect S-VIDEO OUT to TV
Using an S-Video cable, connect the S-VIDEO OUT on the back
2
panel of your DVD-VCR to the S-Video Input on your TV.
2 Connect Component Video Out to TV
To Component Video Input
Using a component video cable, connect the COMPONENT
on Your TV
VIDEO OUT (Y, Pb, Pr) on the back panel of your DVD-VCR to the
Component Video Input on your TV.
3 Connect Audio Out (DVD only)
3
Using RCA audio cables, connect the Left/Right Line Out jacks on
the back panel of your DVD/VCR to the Left/Right Audio Line In
jacks on your TV.
To Left/Right Audio Inputs
• When connecting your DVD-VCR to a TV with the S-Video or
on Your TV
Component Video Output, make sure that you use these Line
Out jacks.
• To activate your connection, see "Alt Video Out" on page 33.
60

Stereo Connections

You can connect your DVD-VCR to your home stereo system or
stereo TV and enjoy stereo sound when watching a movie or TV.
1 Connect DVD-VCR to Stereo
Using RCA cables, connect the Line Out Left and Right Audio jacks
on the back panel of the DVD-VCR to the Auxiliary Inputs on your
stereo receiver. Connect the Video Output also in case you are
using a stereo TV.
2 Set Stereo to Auxiliary Mode
Set your stereo receiver or TV to either "Aux" or "Tape" regardless
of which line input you are using for your particular device.
3 Play a Tape
Insert a DVD or Hi-Fi stereo videotape into your system. Be sure to
adjust the volume on your stereo receiver or TV. Audio will be heard
through your stereo speakers.
• If there is no stereo sound even after you have inserted a Hi-Fi
stereo videotape, press the Audio button until "Hi-Fi" appears
on the on-screen display.
61