LG Verizon G4 Manual

Setting Up Your Phone
Welcome to Verizon Wireless. You're now part
of a growing movement that' s about speed,
signal and strength. This guide will show you
how to set up and use your phone, access
special features, and find help.
Get to Know
Step 1. Remove the Back Cover
With the phone facing down, insert your

Your Phone

fingernail into the slot located on the lower
left of the back cover and lift the cover up
gently.
Optional: Replace the SIM Card
The SIM card is pre-installed in your phone. If
you need to replace your SIM card, gently slide
the old SIM card out of the lower slot. Then
slide the new SIM card into the lower slot with
the Verizon logo facing up and the cut corner
pointed in.
Optional: Insert the microSD Card Step 3. Replace the Back Cover
If you have a microSD card, slide it into the Place the back cover over the back of the
microSD card slot (the upper of the two phone, and then press down along the edges
to secure the cover.
slots) with the gold contacts facing down.
NOTE: The microSD card is sold separately.
Step 4. Charge the Phone
Your phone comes with a USB/Charger
Adapter and a USB cable that connect
Step 2. Insert the Battery
together to charge your phone. Before turning
on your phone, charge it fully.
Insert the battery, making sure to align the
gold contacts. Press down gently to secure
WARNING! Please use only an approved charging accessory
to charge your phone. Improper handling of the USB/
the battery.
Charger Port, as well as the use of an incompatible charger,
may cause damage to your device and void the warranty.
Front Camera
Notification Proximity Laser Detection Rear Camera
LED Sensor Auto-focus
Earpiece
Power/
Lock
Key
NFC
Touch
Point
Back Recent
Button Apps
Button
Microphone Home Button
Speaker
USB/Charger Port
NOTE: Devices and software are constantly evolving—the
screen images and icons you see here are for reference
only.
Using Your Phone
Turning Your Phone On/Off For added security, you can set up a screen
lock such as a Knock Code or numeric PIN.
To turn your phone on, press and hold the
Power/Lock Key for a couple of seconds until
A knock code lets you unlock the screen when
the screen lights up. the screen is off by tapping the correct area
and sequence.
To turn your phone off, press and hold the
Power/Lock Key until the Phone options are
To set up a knock code:
displayed. Tap Power off > OK.
LED 1. > > From the Home screen,
Flash
tap Apps > Settings > Lock screen.
Setup Wizard
When you turn on your phone for the first 2. Tap Select screen lock > Knock Code.
time, you have the option to quickly set
3. Follow the instructions to create your
Volume
up email accounts, sync contacts that you
Knock Code, as well as a backup PIN in
Keys
have backed up with Verizon Cloud, turn on
case you forget your Knock Code.
location services, and more. Simply follow the
onscreen instructions to complete the initial Selecting the Home screen mode
setup of your phone.
You can select one of the two modes: Home
and EasyHome. When you first turn on your
Locking and Unlocking your Phone
phone, it will be set to Home mode. The
To turn the screen on, press the Power/Lock
instructions in this guide are written based on
Key once and the screen will light up. Then
the Home mode.
swipe in any direction to unlock it. You can
> > To change mode, tap
also drag a shortcut icon at the bottom of the
Apps > Settings > Home screen > Select Home.
screen in any direction to open the app.
OR
To turn the screen on using the KnockOn
feature, quickly double-tap the center of the
screen.
To turn off your screen and prevent accidental
key presses, press the Power/Lock Key.
Home mode — Standard experience for users
who are familiar with Android. If selected, your
Home screen will look like this:
EasyHome mode — Simplified and easier
experience for the first time smartphone
user. If selected, your Home screen will look
like this: