Fault Indications - Alber E-Motion ECS Instructions For Use Manual

FAULT INDICATIONS

Flashing
Cause: A Bluetooth connection to the e-motion wheels
is being sought.
Measure: Switch on both e-motion wheels with the on/
off switch. The e-motion wheels should be located in the
immediate vicinity.
Flashing
Cause: No drive wheels have been taught in.
Measure: Please perform the pairing to teach in the
e-motion wheels (see chapter 1).
Flashing
Cause: The batteries of the e-motion wheels have a
residual capacity of less than 10%.
Measure: Please charge the batteries of the e-motion
wheels.
48