Alber E-Motion ECS Instructions For Use Manual page 37

- Press the reset button [6] with a narrow but not pointed object
(e.g., ballpoint pen) for at least 3 seconds.
- During the reset process, all display elements in the LCD of the
ECS remote control [2] and the LED display of the two connected
e-motion wheels light up.
- The completion of the reset process is confirmed by a two-se-
cond-long acknowledgement sound from both wheels.
- Afterwards, the LCD of the ECS remote control [2] shows the
current operating state and the ECS remote control is operational
again.
The following values are returned to the factory settings when
a reset occurs:
- The auto-disconnect time is set to 60 minutes
- The assistance level is set to 1
- All acoustic signals are activated
- The volume of the acoustic signals is set to maximum
37