Samsung DVD-P380 User Manual page 13

C
O N N E C T I O N S
Connecting to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy excelllent quality and accurate color reproduction images. Component video
separates the picture element into black and white(Y), blue(P
and clean images. (Audio signals are delivered through the audio output.)
1
Using Component video cables (not included), connect the
COMPONENT VIDEO OUT jacks on the rear of the DVD player
to the COMPONENT IN jacks of your
2
Using the audio cables, connect the AUDIO (red and white)
OUT jacks on the rear of the DVD player to the AUDIO (red
and white) IN jacks of your
Turn on your DVD player and TV.
3
Set the Video Output to I-SCAN (480i) in the Display Setup
menu. (See pages 49 to 50)
4
Press the input selector on your
Component signal from the DVD player appears on the TV
screen.
Note
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)
- The component jack of your TV may be marked "R-Y, B-Y, Y" or "Cr, Cb, Y" instead of "P
depending on the manufacturer. The number and position of the jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
TV.
TV.
TV remote control until the
), red(P
B
WHITE
RED
Audio Cable
(Included)
RED WHITE
ENG-13
) signals to present clear
R
BLUE GREEN
RED
Component cable
(not included)
RED
GREEN
BLUE
, P , Y"
R B