Download Print this page

Whip Mix Denar SOPA Instructions For Use

Simplified occlusal plane analyzer

Enlarged version

Denar

Simplified Occlusal

Plane Analyzer

(SOPA)

Whip Mix Corporation - West

Instructions for Use

1730 East Prospect Rd., Suite 101

Fort Collins, CO 80525

Toll-Free: 1-800-201-7286

Fax: 1-970-472-1793

www.whipmix.com

Whip Mix

, Denar

and logos are registered

trademarks of Whip Mix Corporation.

Made in U.S.A.

FN 8212-F AD R0708

Table of Contents

Need help?

Do you have a question about the Denar SOPA and is the answer not in the manual?

Page 1 Denar ® Simplified Occlusal Plane Analyzer (SOPA) Whip Mix Corporation - West Instructions for Use 1730 East Prospect Rd., Suite 101 Fort Collins, CO 80525 Toll-Free: 1-800-201-7286 Fax: 1-970-472-1793 www.whipmix.com ©2008 Whip Mix Corporation Whip Mix , Denar and logos are registered ®...
Page 2 SteP One SteP FOUr SteP SIx Remove the upper cast from the articulator. The compass has a standard radius of 4”. This Arc the compass lead to the back molar setting is standard for evaluating the final (Figure 5). This establishes the optimum SteP twO cusp tip heights on an ideal lower occlusal occlusal plane height for the posterior teeth.
Page 3 SteP Seven When an acceptable level for the back of the occlusal plane has been established, draw a line on the cast from cuspid point backward (Figure 6). Figure 6 SteP eIght Repeat for the opposite side. For further instructions on the preparation line, occlusal plane cutting guide and occlusal reduction, refer to “Evaluation, Diagnosis, and Treatment of Occlusal Problems”...