KitchenAid KCM1204 Manual page 14

CARE AND CLEANING
When the "Clean" indicator begins
to flash on the display, run a clean
cycle: Press the CLEAN button.
The "Clean" indicator will stop
flashing. Then press the BREW
2
button to begin the Clean cycle.
When the Clean cycle is complete
(approximately 15 minutes), 3 beeps
will sound, and the "Clean" indicator
will turn off.
Reinstall or replace the water filter.
Replace the filter every 3 months
4
under normal use. Replace it more
often under heavy use.
IMPORTANT: The Clean cycle can be completed at regular intervals, if desired,
without the "Clean" indicator needing to light up. Follow these directions to
clean the Coffee Maker whenever desired.
14 | CARE AND CLEANING
Auto
Regular
Bold
Clean
Small Batch
Run at least 2 water-only cycles after
3
the Clean cycle is complete.
5
Reinstall the coffee filter.
Auto
Regular
Bold
Clean
Small Batch
x 2
Small Batch
Auto
Regular
Bold
Clean