Page 1
INSTRUCTIONS USING TRIM FRAME INSTRUCTIONS USING TRIM FRAME INSTRUCTIONS USING TRIM FRAME INSTRUCTIONS USING TRIM FRAME INSTRUCTIONS USING TRIM FRAME DMT113U1B DMT113U1B DMT113U1B DMT113U1B DMT113U1B Form No. 3106556.016 1/96 (Replaces 3106556.008) The Dometic Corp. LaGrange, IN 46761 Copyright 1996 The Dometic Corporation...
INSTALLATION INSTRUCTIONS See Figure 2 for location of electrical outlet inside the 1. GENERAL INFORMATION opening at the rear. ELECTRICAL REQUIREMENTS Observe all governing codes and ordinances. FIG. 2 A 120 Volt, 60 Hz AC only, 15 or 20 amp fused electrical supply is required.
3. REMOVING SCREWS FROM 5. MOUNTING VENTILATION GUIDE OUTER CASE DUCT A. Remove four (4) screws securing the front side of the A. Install the ventilation guide duct as shown in FIG. 6. outer casing. See FIG. 4. B. Secure the front side of the ventilation guide duct and B.
Need help?
Do you have a question about the DMS081U1S and is the answer not in the manual?
Questions and answers