Download Print this page

Removing Your Old Thermostat - Johnson Controls GLAS Installation Instructions Manual

Hide thumbs Also See for GLAS:

Removing your old thermostat

4. Before removing the wires from your thermostat terminals, use the included wiring

stickers to label your wires.

5. Disconnect your old thermostat and remove the backplate.

Note: While disconnecting your old thermostat, use drywall-safe tape to secure the

wires and keep them from falling back into the wall.

GLAS smart thermostat installation instructions -

2018 Johnson Controls

Do you have a question about the GLAS and is the answer not in the manual?