Radio Communications - Ewattch SQUID-HC-LORAWAN Technical Manual

RADIO COMMUNICATIONS

The SQUID periodically sends the current measurements performed on its 12
measurement clamps in the form of consumption indexes (Ah) via a LoRaWAN radio link
To be able to configure a SQUID on the LoRaWAN network, you must use the following
codes:
- DevEUI: This is a factory programmed identifier which makes each object unique and is
indicated on the label of each product.
E.g. 70B3D54750120168
- AppEUI: This single application identifier allows the objects to be grouped together. This
64-bit address allows the peripherals to be classified by application.
AppEUI Ewattch: 70B3D54750080001
- AppKey: This is a key shared between the peripheral and the network and used to derive
the session keys. This parameter might need to be changed.
Switches 1 and 2 allow the transmission period to be chosen
Switches 3 and 4 are currently not used
wattch
LoRaWAN configuration
Transmission period
One transmission every
10 minutes
One transmission every
30 minutes
Not used
8
SQUID-HC-LORAWAN Technical Documentation
One transmission every
20 minutes
One transmission every
60 minutes