Troubleshooting Guide - Russound Acclaim 7 Series Installation Manual

Configuring Your Receiver
Your home theater receiver or surround processor most likely has a choice of
settings for different types of speakers. If your receiver or processor has an auto
setup procedure, you will probably get the best results using the auto setup.
If you use a manual speaker setup procedure, you will get the best results by
setting the LCR speakers to the "Small" setting if you are using a subwoofer, or
the "Large" setting if you are not using a subwoofer.
Russound In-wall LCR Loudspeaker Installation Manual

Troubleshooting Guide

Before returning your Russound speakers for service, try these simple
remedies first.
No sound from either speaker:
• Incorrect source selected on receiver or preamplifier.
• Mute button pressed on receiver.
• Wrong speaker output selected; many receivers have an "A" and "B" speaker
switch. Make sure it is in the correct position.
• In-wall Volume control not turned up or wired incorrectly.
• If using a speaker selector, room/station not turned on or improperly
connected.
No sound from one speaker:
• Unsecured connection at either the speaker or amplifier - double-check all
connections.
• Balance control turned all the way left or right - return it to center.
• Bad connecting cable between sound source and amplifier - try a new
cable.
• Check for stray wire strands crossing the speaker terminals.
• Defective speaker - contact your Russound dealer or call Russound Tech
Support at 603.659.5170.
• Any other problems not listed, discuss with your dealer or call Russound.
troubleShootIng guIde
11