Advertisement
CLS LDC-41 GII DMX LED DRIVER
Manual
# 58014
Wall
170 gr
IP20
24~48 VDC
Max. 0,5 Watt
V1.0 - December 2017
Index
Safety information
Optional accessories
Introduction
Measurements
Lay-out description
Pinning DMX output
Installation
Mounting
Choosing power supply
Connect power supply
Connect LED fixture
Connect DMX
Status display
Configuration
Page 1: DMX addressing
Page 2: Channel configuration
Page 3: Control configuration
Page 4-7: Current configuration
Page 8: Test sequence
Page 9: Store configuration
Page 10: Cancel configuration
Technical specifications
www.cls-led.com
INDEX
- 2 -
2
3
3
4
4
4
4
5
5
5
6
6
7
8
8
9
9
10
10
10
10
10
11
www.cls-led.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CLS LDC-41
Summary of Contents for CLS LDC-41
- Page 1 INDEX CLS LDC-41 GII DMX LED DRIVER Manual V1.0 - December 2017 Index Safety information Optional accessories Introduction Measurements Lay-out description Pinning DMX output Installation Mounting Choosing power supply Connect power supply Connect LED fixture Connect DMX Status display Configuration...
-
Page 2: Safety Information
SAFETY INFORMATION INTRODUCTION The CLS LDC-41 is a DMX controllable LED dimmer, which has 4 current controlled DC outputs. The current Qualified Disconnect the technician can be adjusted in steps of 50mA from 350 to 1000mA per channel. Each channel can drive 2 to 12 LEDs... -
Page 3: Installation
Mounting are powered! The LDC-41 has a unique feature, it is designed to be installed on a DIN-rail. Now it is possible to install the LDC-41 directly next to the power supplies which are also suitable for DIN-rail mounting. This helps to keep your installation work modular and fault proof. -
Page 4: Menu Description
When using the LDC-41 with a DMX controller, other than the CLS Zense you can find the connection method on the side of the LDC-41. When no UTP cable is used it is adviced to use the LD-serie gender Page 1: output status Chn. 1 changer cable (art. - Page 5 DMX channel used to control the outputs of button Default DMX address: 1 the LDC-41. Use the up and down button to adjust the value. When Channel configuration is selected Channel Option Control configuration press the menu button to return to the main menu.
-
Page 6: List Of Symbols
No part of this manual may be reproduced, in any form or by any means, Colour changing Lightsource without permission in writing from CLS-LED BV. Other legal information can be found in our General conditions, found on the back of RGB, RGB-W, RGB-A, Equipped with a CLS, Citizen or a Xicato...
Need help?
Do you have a question about the LDC-41 and is the answer not in the manual?
Questions and answers