Samsung DVD-H1080R User Manual page 18

connections
Connecting to an Audio System (dolby digital, MPeg2 or dtS Amplifier)
1
If using a Coaxial cable (not included), connect the dIgItAL
AUdIO OUt (COAXIAL) jack on the rear of the DVD player to
the dIgItAL AUdIO In (COAXIAL) jack of the Amplifier.

Using the video signal cable(s), connect the HdMI,
COMPOnent or VIdeO OUt jacks on the rear of the DVD
player to the HdMI/dVI, COMPOnent or VIdeO In jack of
your TV as described on pages 12 to 16.

Turn on your DVD player, TV, and Amplifier.

Press the input select button of the Amplifier to select the
audio input your DVD player is connected to in order to hear
sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 50 to 51)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
18_ connections
Coaxial Cable
(not included)
dolby digital or
dtS amp