3d-Radar Geoscope Mk4 User Manual page 21

TM
GeoScope User's Manual
6. Select survey settings by clicking the cog-wheel icon and selecting
"Survey Settings".
a. Adjust the sliders. Note that the max speed changes according
to your slider settings. Depending on the "time window" setting,
you may or may not get the full depth in the quick view. The
full range is always recorded to file.
b. Select your "File Location" for storage of 3dra files.
c. Press "OK" to close the dialog.
7. Push "Start" button in the main window. Notice file name and location
in window title bar. If you are driving too fast, some scans will be lost
and vertical red stripes will be shown in the data view. When the
acquisition is done, press "Stop". The 3dra file is now available in your
specified location.
8. Make sure the DMI Calibration values, the General DMI Settings and
the External GPS Settings are updated in the "System Settings" tab
before performing a survey task.
9. 3dR Examiner software version 2.61 or newer is required for post-
processing the .3dra files.
© 2013 3d-Radar AS Page 17 Revision 2.0 Date: 02/07/2013