HOBO® U12 Stainless Temperature
Data Logger (U12-015 and U12-015-02) Manual
HOBO U12 Stainless
Temperature Logger
Models: U12-015
U12-015-02
Included Items:
• O-Ring Replacement Kit
(U12-015-ORING-E for EPDM
and U12-015-ORING-V for
Viton)
• Five-inch Probe (with
U12-15-02 only)
Required Items:
• HOBOware® (go to
www.onsetcomp.com/
hoboware-free-download)
• USB cable
Plot A
200
100
0
-100
-200
-300
-400
-40
-20
0
20
40
Temperature (°C)
Plot B
7938-K MAN-U12-015
Find Quality Products Online at:
Specifications
Measurement Range
Accuracy
Resolution
Drift
Response Time in 1 m/s
(2.2 mph) airflow
Response Time in Water
Time Accuracy
Operating Environment
Operating Temperature
Battery Life
Memory
Construction
Weight
Logger Dimensions
Probe Dimensions
(U12-015-02 only)
Pressure/Depth Rating
Vibration Rating
NIST Certificate
Connecting the Logger
8.6
4.3
The U-Family logger requires a USB interface cable to connect to the computer. If possible,
avoid connecting at temperatures below 0°C (32°F) or above 50°C (122°F).
0.0
1. Remove the stainless steel end-cap from the logger by turning it counter-clockwise. If
-4.3
the cap is difficult to turn, place the stem of a small screwdriver through the hole in the
-8.6
end-cap for better leverage.
-13.0
2. Plug the large end of the USB
interface cable into a USB port on the
-17.3
60
80
100
120
computer.
3. Plug the small end of the USB
interface cable into the logger as
shown in the diagram at right.
GlobalTestSupply
www.
The HOBO U12 Stainless Temperature Data Logger is a single-channel
temperature logger with 12-bit resolution that can record up to 43,000
measurements. The logger uses a direct USB interface for launching and data
readout by a computer or HOBO shuttle.
The U12-015-02 model is the same as the U12-015 model, but also includes a
5-inch probe.
-40° to 125°C (-40° to 257°F)
±0.25°C from 0° to 50°C (±0.45°F from 32° to 122°F), see Plot A
0.03°C at 25°C (0.05°F at 77°F), see Plot A
0.05°C/year + 0.1°C/1000 hrs above 100°C
(0.09°F/year + 0.2°F/1000 hrs above 212°F)
U12-015: <10 minutes, typical to 90%
U12-015-02: 2.25 minutes, typical to 90%
U12-015: <3.5 minutes, typical to 90%
U12-015-02: 20 seconds, typical to 90%
±2 minute per month at 25°C (77°F), see Plot B
Air, water, steam, 0 to 100% RH
Logging: -40° to 125°C (-40° to 257°F)
Launch/readout: 0° to 50°C (32° to 122°F), per USB specification
3 year typical use, factory replaceable
64K bytes (43,000 12-bit measurements)
316 series stainless steel, EPDM or Viton O-ring; see Food-Grade
Compliance section for additional details
U12-015: 72 g (2.5 oz)
U12-015-02: 82 g (2.9 oz)
17.5 x 101.6 mm (0.69 x 4.00 inches)
4 x 124 mm (0.16 x 4.90 inches)
2200 psi (1500 m/4900 ft) maximum
Navy spec: NAVMAT P-9492 (non-probe model only)
Available for additional charge; temperature range -30° to 120°C
(-22° to 248°F)
The CE Marking identifies this product as complying with all
relevant directives in the European Union (EU).
.com
sales@GlobalTestSupply.com
Need help?
Do you have a question about the U12-015 and is the answer not in the manual?
Questions and answers