JPI FS-450 Quick Reference Manual

JPI FS-450 Quick Reference Guide
No Fuel Added
1. On initial power up, see
"FILL ? n"
2. Tap STEP to exit
Reset Fuel Used
1. Tap STEP until "USD"
indicator lights up
2. Hold AUTO for 3
seconds to reset fuel
used to 0
Filled Tank
In flight, do steps 1-3 first (on
power-up, skip to step 4)
1. Hold both STEP and
AUTO until you see
"ProG ModE", followed
by "FUEL ? n"
2. Tap AUTO and see
"FUEL ? y"
3. Tap STEP
4. See "FUEL GAL"
followed by "FILL ? n"
5. Tap AUTO and see "FILL
48*"
a. With tabs, tap
6. Tap STEP to exit
AUTO again and
see "FILL 34*"
Added or Removed Fuel
In flight, do steps 1-3 first (on
power up, skip to step 4)
1. Hold both STEP and
AUTO until you see
"ProG ModE", followed
by "FUEL ? n"
2. Tap AUTO and see
"FUEL ? y"
3. Tap STEP
4. See "FUEL GAL"
followed by "FILL ? n"
5. Tap AUTO 2 or 3 times
and see "FILL Add"
6. Tap STEP and see "0.0
GAL"
a. Hold AUTO to
b. Tap AUTO to
7. Tap STEP to exit
Reset Alarm
•
Temporary reset (next
10 minutes): Tap STEP
•
Reset for remainder of
flight: Hold STEP until
"OFF" appears
increase
decrease