Download Print this page

GigRig Distributor Instructions For Use

Hide thumbs Also See for Distributor:

The GigRig Ltd

Unit 85 Basepoint Business Centre

Swindon

SN5 7EX

The GigRig

Distributor

The GigRig Distributor works as part of our Modular Power Supply to distribute power

across your pedalboard. The Distributor has six non-isolated 9v outputs that can

deliver HUGE amounts of current when needed. Use The GigRig Generator to power

your Distributor and from there you can add Isolators, High Current Adapters, Virtual

Batteries and Cable Adapters to correctly power your DC powered equipment.

Instructions for use:

Each Distributor is supplied with 6 x 1.5 metre length DC leads with right angled

2.1mm connectors to power your equipment and 1 metre of cable wrap to keep your

leads tidy once installed.

Simply follow the instructions listed in the diagram provided to correctly connect

them.

Please note, we cannot guarantee the performance of the adapter from any other

power supply other than

DO NOT STRIP THE CABLE.

DO NOT COVER THE ADAPTER, IT MAY OVERHEAT AND SWITCH OFF!

It is normal for the adapter to run warm.

The GigRig Distributor is designed for indoor use. (Just don't get it wet!).

Fully compliant with RoHS√ (lead free product.)

Table of Contents

Need help?

Do you have a question about the Distributor and is the answer not in the manual?

Page 1 Batteries and Cable Adapters to correctly power your DC powered equipment. Instructions for use: Each Distributor is supplied with 6 x 1.5 metre length DC leads with right angled 2.1mm connectors to power your equipment and 1 metre of cable wrap to keep your leads tidy once installed.
Page 2 Warranty: The GigRig warrants the product to be free from defects in material and workmanship for a period of 2 years from the original date of purchase. If the product fails within the warranty period, The GigRig will repair or, at our discretion, replace the product and cover the cost of return shipping to the original purchaser.