Table of Contents
Advertisement
Operator Display Error Indications
Front/Rear and Left/Right Displays
Due to the limited number of LED's available, either the front or rear LED will
flash to indicate a problem has occurred with a front or rear sensor,
respectively. For Left/Right displays, either the left or right LED will flash to
indicate a problem has occurred with a left or right sensor, respectively.
The error code is indicated by the number of quick LED flashes followed by a
short off time. See Table 1 below for detailed information:
Flashing Sequence
1 on, 1 off
2 on, 1 off
3 on, 1 off
4 on, 1 off
Tel: +386 3 4900 800
Reason
Built in Self Test Error – Contact Factory
Built in Self Test Error – Contact Factory
No communication with sensor(s)
Missing sensor (multiple sensors only)
Table 1. F/R and L/R Display Error Codes
http://radar-electronics.com
Page 3
3700047B
Copyright 2016
Advertisement
Table of Contents
