Table of Contents
Advertisement
Operator Display Description
There are two "specialty" displays specifically designed for use with the
Xtreme PreView
sensor system. A Front/Rear display (XPV4103) and a
®
Left/Right display (XPV4104), and an OC (Open Cab) variant.
Front/Rear - XPV4103 / XPV4103 OC
The Front/Rear operator display provides the vehicle operator with a visual
indication of a detected object for a multiple sensor system. The Front/Rear
display provides LEDs to indicate detection at the front or rear of the vehicle
(shown below). A Status LED provides a visual indication of system health –
green indicates powered and operating, while red indicates a malfunction.
The front/rear display unit also contains a buzzer which provides an audible
alert that will increase in rate as an object becomes closer, providing the
operator with another cue that an object is being detected. The Volume
Control/Acknowledge Switch allows the vehicle operator to adjust the buzzer
volume.*
Rear Indication
Status LED
Volume Control/
Ack switch
Front indication
*XPV4103 OC does not include the Volume Control / Acknowledge Switch.
Tel: +386 3 4900 800
http://radar-electronics.com
3700047B
Copyright 2016
Page 1
Advertisement
Table of Contents
