Roper B5007X0 Use And Care Manual page 13

HEPLACING THE OVEN LIGHT (Some Models)
Do not touch oven bulb when hot, with wet hands, or wrpe oven lrghl area
with wet cloth Unplug or drsconnecl the electrlcal supply to range before
removrng
Never touch the electrically live metal collar on the bulb when replac-
ing it.
Electrical power musf be shut off if you have to replace a broken bulb.
SELF-CLEANING OVENS ONLY:
1
Remove the three screws and Irft off the glass retainer, glass cover
and gasket
2 Replace the bulb wrth a 40 watt appliance bulb
3 Replace the gasket, glass cover and glass retainer Tlghten screws
securelv
NON-SELF-CLEANING OVENS:
Replace bu b wrth a 40 watt applrance bulb
-GASKET
,*
I
/I
,' GLASS
& SCREw
SELF-CLEANING OVENS
BULB
SOCKEl
NON-SELF-CLEANING OVENS
REMOVABLE OVEN RACKS
Be careful not to scratch the oven flnrsh when rnstallkng or removrng the
oven rack
To Install:
1. Set the raised back edge of the rack on a parr of rack gurdes
2 Push the rack In unlrl you reach the bump in the rack gurde, then I ft
the front of the rack a bit and push the rack all the way in.
To remove:
1 Pull the oven rack out then up.
See the cleanrng chart on page 12
13