Table of Contents
Advertisement
Hold
This feature allows you to hold played notes after removing your hands from the keyboard.
•
Press a key or multiple keys on the keyboard.
•
Press [Hold]
•
Release the keys on the keyboard
•
The notes will continue to play until [Hold] is deactivated.
Pads
Activating the [Pads] menu changes the display button options to functions
that exclusively affect the pads.
Learn
It's easy to change a pad note assignment using the Pad Learn function.
It works as follows:
•
Engage [Learn]
•
Hit the pad you want to assign a new note value to.
•
Press the key on the keyboard that corresponds to the note you want to assign to the pad. You can keep playing notes on the
keyboard until you have found the note you want. You can also assign chords to the pads, by playing notes simultaneously (up to 6).
•
Repeat the two previous steps to change more assignments.
•
Disengage [Learn] when you are done.
Your settings are stored over power cycling, but make sure you save to a pad map (See page 23) if you want to be sure they are not lost in
the future.
Repeat
Opens the pads' [Repeat] menu. See page 19 for details.
Vel Fix
When [Vel Fix] is engaged, the pads output velocity at a fixed value.
•
To set the fixed velocity setting, press and hold [Vel Fix].
•
Move [E1/Data] to select a value between 0-127. This is the velocity value that will be output by the keys when [Vel Fix] is engaged.
•
Keep moving [E1/Data] past 127 will select 'MW'. Select this setting if you want to control the fixed velocity value in real time, using the
modulation wheel.
•
Release the [Vel Fix] button when done.
Spread
Velocity Spread assigns the note of the pad last played, across all 8 pads, but at fixed incrementally higher velocity values.
•
Hit a pad that you want to play using the velocity spread function.
•
Press [Spread] to engage the function.
•
Play the 8 pads. Each pad should now play the same note at gradually higher fixed velocity values.
•
Press [Spread] again to disengage the function.
The fixed velocity value for each pad can be adjusted. With [Spread] engaged, do the following:
•
Hit a pad that you want to adjust the fixed velocity of.
•
Press and hold [Spread].
•
Move [E1/Data]. The top info line updates the fixed velocity value.
•
Release [Spread] when you are done.
www.nektartech.com
Nektar Panorama T4 & T6 User Guide
17
Hide quick links:
Advertisement
Table of Contents
