Page 1
INSTRUCTION MANUAL Model 11076 Diamondback Aluminum Tire Bead Breaker with Carrying Case...
Page 2
Serious injury or Introduction death. Always deflate tires This volume includes on operating and maintaining the AME 11075. It is before removing a wheel, a your responsibility to operate and maintain this unit in a manner that will rim, or part of a rim clamp or result in the safest working conditions possible.
Page 3
The air supply should be between 5 and 10 CFM at 100 PSI to obtain proper operating characteristics. In addition, the air line should be equipped with an air line filter. - 3 - AME INTERNATIONAL...
Page 4
4. Step on the PUMP end of the pump pedal. The clamping rod will begin to extend and the jaw will grip the rim. The AME 11075 includes a clamping jaw pivot pin which can be placed in one of four jaw pivot positions for use on different width flanges. The top hole (closest to the handle) is used for smaller rim flanges, and the bottom hole (furthest from the handle) is used for larger rim flanges.
Page 5
NOTE The chrome plated rod surfaces provide the seal for the tool. Any steps taken to ensure the con- tinuing quality of the rod surfaces will increase the service life of the tool. - 5 - AME INTERNATIONAL...
Page 6
INSTRUCTION MANUAL Parts List For Diamondback Aluminum Tire Bead Breaker Model 11075 - 6 - AME INTERNATIONAL...
Page 7
INSTRUCTION MANUAL Parts List For Diamondback Aluminum Tire Bead Breaker Model 11075 - 7 - AME INTERNATIONAL...
Page 8
INSTRUCTION MANUAL Parts List For Diamondback Aluminum Tire Bead Breaker Model 11075...
Need help?
Do you have a question about the 11076 and is the answer not in the manual?
Questions and answers