Advertisement
Duct smoke housing, 2-wire
Figure 3.12: Airflow direction
Figure 3.13: Exhaust/sample tube placement
11. Insert the sample and exhaust tubes into the housing, ensuring the sample tube holes
12. Secure the tubes in place using the tube clamps provided (see the following figure).
Figure 3.14: Mounting tubes in housing
Bosch Security Systems, Inc.
1 Sample tube
3 Sampling holes
1 Exhaust tube
3 Airflow direction
face into the air flow. Ensure the tube alignment point set into the housing.
2 Airflow direction
2 Sample tube
Installation manual
Mounting | en
13
2017.04 | 7.0 | F.01U.071.685
Advertisement
