Duct smoke housing, 2-wire
Figure 3.8: Foam gaskets
7.
Figure 3.9: Mounting the housing
8.
Bosch Security Systems, Inc.
1 Sample/exhaust tube posts
Mount the housing to the jack nuts using the supplied machine screws (see the following
figure). Remember that over‑tightening the screws can cause excessive bowing of the
duct.
1 Duct
3 Machine screws (supplied)
Determine and remove the appropriate wire knockouts for power and for any remote
indicator wiring (see the following figure).
1
2
2 Foam gaskets
2 Housing
Installation manual
Mounting | en
11
2017.04 | 7.0 | F.01U.071.685