Advertisement
ML610Q102 Reference Board User's Manual
ML610Q102 Reference board is prepared by LAPIS SEMICONDUCTOR to have you study the operations of
ML610Q102.
The board is only minimum necessary components are mounted on the board by LAPIS SEMICONDUCTOR for brief use
of ML610Q102.
By using the board with "uEASE on-chip debug emulator" (hereinafter referred to "uEASE") and "free sample U8
Development Tools CD-ROM" which is bundled in the package of uEASE not only Software development/debugging but
also writing Flash ROM in the devices are capable.
This board also works in stand alone mode with external power suppy without uEASE.
Before starting works with this board, read below carefully and understand notices.
1. The board features
Supports flash ROM programming and on-chip debugging (using RESET_N and TEST pins)
2. The board hardware specifications
Please refer to the reference schematics for detail on connections of each hardware parts.
Embedded microcontroller
Embedded parts
Operating voltage
Board size
3. Parts layout
U1: ML610Q102
J1: Jumper for RESET_N switch ( 3pin pin-header and short pin )
J2: Jumper for VDD switch ( 3pin pin-header and short pin )
CNU1,2: Connector for Peripheral
CNUE: Connector for on-chip debug emulator ( 14pin connector )
C1 – C3: Capacitors for power supply
+2.7V to +5.5V
30.00 x 40.00 mm
J2
J1
<fig.1 Parts layout>
2
CNU2
CNU1
Advertisement
