Step 4
: After the unit has loaded the correct interface, Scroll down
circular tick box to edit the default account.
Step 5:
Scroll up to the Channel configuration and modify the default configuration with
the username and password provided by your ISP
Channel mode: PPPoE
Enable NAPT: Enabled by default
Enable Firewall: Enabled by default
802.1q: Disable (Enabled by default)
IP Protocol: IPv4/IPv6
PPP setting Username and Password. Please enter details provided by ISP (Default is
guest@telkomadsl and guest).
Step 6:
Click on modify to apply the new settings.
Setup Guide for the DSL-224
to the WAN table. Select the