Setup menu
[ Quick view ]
■ If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is only possible with still images.
● Sub menus
[Off]
: The quick view function can't be
activated.
[0.5, 1, 3 sec] : The captured image is briefly
displayed during the selected time.
[ Start up image ]
■ You can select the image that is first displayed on the LCD monitor whenever
the camera is turned on.
● Start up image : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image with the
[START IMAGE] in the [RESIZE] menu in the play
mode.
- The start-up image will not be deleted by [DELETE]
or [Format] menu.
- The User images will be deleted by [Reset] menu.
[ Sound Volume ]
■ You can select the sound volume levels of start sound, operation sound and
shutter sound.
● [Sound Volume] sub menus : [Off], [Low], [Medium],
Off
Imprint
0.5 sec
LCD
1 sec
AF Lamp
3 sec
Power Off
◀
Quick View
Exit:BACK
[ Operation Sound ]
■ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
● [Sound] sub menus : [Off], [Sound 1], [Sound 2],
● You can set sound to [Off]
Off
Start Image
◀
LOGO
Sound Volume
User image
BEEP Sound
[ Start up sound ]
Start Sound
Shutter Sound
■ You can select the sound that is activated whenever the camera is turned on.
Exit:BACK
● Start up sound : [Off], [Sound 1], [Sound 2],
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
[High]
[Sound 3]
[Sound 3]
Off
Start Image
Low
Sound Volume
◀
Medium
BEEP Sound
High
Start Sound
Shutter Sound
Exit:BACK
Off
Start Image
Sound 1
Sound Volume
Sound 2
◀
BEEP Sound
Sound 3
Start Sound
Shutter Sound
Exit:BACK
Off
Start Image
Sound 1
Sound Volume
Sound 2
BEEP Sound
◀
Sound 3
Start Sound
Shutter Sound
Exit:BACK
《55》