Distance And Aperture When Using The Built-In Flash; Calculating Aperture Value From Shooting Distance; Calculating Shooting Distance From Aperture Value - Samsung GX-20 User Manual

Using the Built-in Flash

Distance and Aperture when Using the Built-in Flash

■ A set criteria is necessary between the guide number, aperture and distance
when shooting with the fl ash. Calculate and adjust the shooting conditions if
fl ash is not suffi cient.
● Built-in fl ash guide number
Sensitivity
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600

Calculating Aperture Value from Shooting Distance

The following equation calculates the aperture value for shooting distances.
Aperture Value Used F = Guide number ÷ Shooting distance
Example)
When sensitivity is [ISO 200] and shooting distance is 6.1 m, aperture value is:
F = 18.4 ÷ 6.1 = 3
If the resulting number (3, in the above example) is not available as a lens aperture,
the smaller number that is closest (2.8, in the above example) is generally used.
104
Built-in fl ash guide number
13
18.4
26
36.7
52

Calculating Shooting Distance from Aperture Value

■ The following equation calculates the distance of the fl ash for aperture
values.
Maximum fl ash distance L1 = Guide number ÷ Selected aperture
Minimum fl ash distance L2 = Maximum fl ash distance L1 ÷ 5*
Example)
When sensitivity is [ISO 200] and aperture value is F4
L1 = 18.4 ÷ 4 = approx. 4.6 (m)
L2 = 4.6 ÷ 5 = approx. 0.9 (m)
Therefore, the fl ash can be used in a range of about 0.9 m to 4.6 m. The fl ash cannot
be used when the distance is less than 0.8 m. When the fl ash is used at closer than
0.8 m, it causes vignetting in the picture corners, light is distributed unevenly and the
picture may be over-exposed.
* The value 5 used in the formula above is
a fi xed value which applies only when
using the built-in fl ash alone.