Advertisement
VL53L1X Distance Sensor User Manual
USING VL53L1X_GUI
1. Connect the sensor to NUCLEO-F401RE according to Hardware connection
2. Install ST's VL53L1X_GUI software and run it. Open the software and write
firmware to NUCLEO board: About->Flash Fw (for this example, only supports
NUCLEO-F401RE)
3. Choose Low-Power Automous, and choose Distance Mode to Short. Click Start.
The distance curve will be displayed on software.
Version: V1.0.0 Date: 2018.06.25
9
Advertisement
