Function Lamp - Samsung Digimax u-ca5 User Manual

Function lamp

You can turn on and off the function lamp located on the front of the camera.
Setting the function lamp
1. In any mode with the exception of Voice Recording mode,
press the MENU button.
2. Press the LEFT/ RIGHT button and select the [Setup]
menu tab.
3. Select the [Lamp] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [Off] is selected : The function lamp will not light up.
If [On] is selected : The function lamp will light up.
Description of the Function lamp
Function
Power on
After taking a picture
While movie recording
While voice recording
When the USB cable is inserted
Transmitting Data
While the self timer is
functioning
The lamp blinks and turns off when the camera is ready
to take a picture
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
The lamp blinks at a 2-second interval
The lamp blinks at a 2-second interval
The lamp lights up
The lamp blinks
The lamp will function while using the self-timer even if
the configuration is set to off the lamp.
(Based on 10-second Self-timer; see p. 35)
NOR
Setup
Sound
USB
Lamp
Back:
Description
Off
On
Set : OK
89