Samsung Digimax U-CA 3 User Manual page 32

+/- button
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor ( Ev).
3. Press the +/- button again. The value you set will be
saved and the Exposure Compensation setup mode will
close. If you change the exposure value, the exposure
indicator ( ) will be displayed on the bottom of the LCD
monitor.
INFORMATION
A negative exposure compensation value reduces the exposure. Note that a positive
exposure compensation value increases the exposure and the LCD monitor will appear
white or you may not get good pictures.
White balance
: The white balance control allows you to adjust the colours
to appear more natural looking. The White Balance is
available in Auto Shooting mode (
and Movie Clip mode.
Selecting a White Balance
1. Press the +/- button, and then use the UP and DOWN
buttons to select the white balance icon (
shown.
2. Use the LEFT and RIGHT buttons to set the white balance to the desired value. The value
you set will be displayed on the LCD monitor.
- AUTO
- DAYLIGHT
- CLOUDY
- FLUOR.
- TUNGSTEN
- CUSTOM
Different lighting conditions may cause a colour cast on your images.
3. Press the +/- button again. The value you set will be saved and White Balance setup mode
will end.
32
), Manual mode,
: The camera automatically selects the appropriate white balance
settings, depending on the prevailing lighting conditions.
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For shooting under fluorescent lighting.
: For shooting under tungsten (standard light bulb) lighting.
: Allows the user to set the white balance according to the shooting
condition.
). The white balance menu bar will appear as