About The Software - Samsung DIGIMAX I5 User Manual

About the software

After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following
window should automatically run.
■ Camera driver : This enables images to transfer between the camera and PC.
This camera uses the USB Storage Driver as the camera driver. You can use the camera as
a USB card reader. After installing the driver and connecting this camera to the PC, you can
find [Removable Disk] in [Windows Explorer] or [My computer]. A USB Storage Driver is
provided only for Windows. A USB Driver for MAC is not included with the Application CD.
But you can use the camera with Mac OS 9.2 ~ 10.3.
■ XviD codec : This makes movie clips(MPEG-4) recorded with this camera play back on
a PC.
To play back a movie clip recorded with this camera, you must install the XviD codec.
If a movie clip recorded with this camera does not play well, install this codec.
This software is only compatible with Windows.
If a movie clip can't play back on the Mac OS, please visit the following site.
http://www.divx.com/divx/mac/
If a movie clip can't play back on the Mac OS, use a media player that supports XviD codec
(Mplayer, VideoLanClient)
■ Digimax Viewer : This is a program for viewing stored images.
You can see the stored images in the memory directly on a PC monitor. You can also copy,
move or delete the images and enlarge/downscale the image sizes with Digimax Viewer.
This software is only compatible with Windows.
Before connecting the camera to the PC,
you should first install the camera driver.
《115》