Advertisement
Quick Links
Troubleshooting & Specs
Amps / Volts requirements
Min / Max operating temperature
Temperature Accuracy
Temperature Mode
Min / Max Humidity
Humidity Accuracy
Humidity Mode
CO2 Mode
Weight / Dimensions
Remote sensor length
Life Expectancy
Sentinel products are distributed by:
GPS / Global Product Solutions LLC.
EVC-2
15 amps @ 120 volts
32 to 120° F
+/- 1° F
Heat or Cool
0-99% RH
+/- 3% RH
Humidify or Dehumidify
Day or Night
7 lbs / 8" x 6.5" x 3.1"
16 feet
> 10 years
All Sentinel Timers and
controllers offer a
3-year warranty.
Ask your retailer for
details.
www.growgps.com
Instruction Manual
EVC-2
Environmental Controller
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sentinel EVC-2
Summary of Contents for Sentinel EVC-2
- Page 1 7 lbs / 8” x 6.5” x 3.1” Remote sensor length 16 feet Life Expectancy > 10 years All Sentinel Timers and controllers offer a 3-year warranty. Ask your retailer for details. Sentinel products are distributed by: GPS / Global Product Solutions LLC. www.growgps.com...
- Page 2 Like the temperature, there are separate Day and Night humidity settings that provide remarkable control of critical humidity levels especially at night. • The EVC-2 coordinates the use of supplemental CO2 with the temperature control function. It is the best and most cost effective device on the market. •...
-
Page 3: Troubleshooting
A quick look at the EVC-2… Troubleshooting Problem: The unit does not power up at all. LED displays temperature Check and reset the circuit breaker. A small red button will pop out at and Humidity levels the bottom of the unit, press it in to reset. If the problem continues, reduce the number of devices connected to the unit. - Page 4 *Note: Make sure the thumb-screws are in place before generators produce large amounts of electronic noise, which can affect other equipment. The Sentinel line of controllers and timers have been “hardened” by attempting to use the controller. The sensor is VERY fragile… falling to using shielded cable and shielded enclosures however…...
-
Page 5: Connection Examples
Connection Examples • Night Humid: Press this button for 1 second to display and change the current “Nighttime” humidity setting. For indoor growing, Dehumidifier or a • Temp Min/Max: Press this button for 1 second to display the Cooling devices such as humidifier can be ventilation fans or connected to the... - Page 6 Humidify, rH Incr press the Up or Down button and then press Enter/ Heat & Cooling modes: You can change the EVC-2 to control either a Reset. cooling or heating device. Press and hold the Heat/Cool button for one second. Use the Up or Down buttons to change the display to the desired Humidity Mode: It is popular to activate the “Cooling”...
Need help?
Do you have a question about the EVC-2 and is the answer not in the manual?
Questions and answers