Advertisement
Quick Links
Specifications
Amps / Volts requirements
Min / Max operating temperature
Min / Max Humidity
Time setting
Hi-temp setting
Hot-start delay time
24-hour Timeclock Accuracy
Weight / Dimensions
Life Expectancy
All Sentinel Timers and controllers offer a 3-year warranty.
Sentinel products are distributed by:
GPS / Global Product Solutions LLC.
www.growgps.com
Printed in China using 100% recycled materials
HID-1
15 amps @ 120 volts
32 to 120° F
0-99% RH
Hours, Minutes, Seconds
Fully adjustable
Fully Adjustable
+/- 30 seconds / year
4 lbs / 8" x 4" x 3"
> 10 years
Instruction Manual
HID-1
HID Lighting Controller
Advertisement
Related Manuals for Sentinel HID-1
Summary of Contents for Sentinel HID-1
- Page 1 Weight / Dimensions 4 lbs / 8” x 4” x 3” Life Expectancy > 10 years All Sentinel Timers and controllers offer a 3-year warranty. Sentinel products are distributed by: GPS / Global Product Solutions LLC. www.growgps.com Printed in China using 100% recycled materials...
- Page 2 Welcome to the future... The HID-1 HID Lighting Controller is the Problem: The timeclock is not keeping the correct time. simplest and BEST lighting controller you can buy. It is 100% digital The timeclock is backed-up with a long-life lithium battery that only and programmable.
- Page 3 / 10-amps @ 240V COMBINED load. There are two outlets (receptacles) dropped below the Max Temp setting. The display also records the on the HID-1. One receptacle provides power for your lighting or lighting actual time that the fault occurred to aid in troubleshooting the problem.
- Page 4 The light Off receptacle is used to control any device that needs to be or the next timed event occurs. turned On only at night. The HID-1’s digital timeclock will turn Off the • Display Temp: Press this button to display the current temperature.
- Page 5 HID-1 OR use 1 or more HPH-4 or HPH-8 or PXM to be able to operate as many HID lights as you need. The 24-hour timeclock on the HID-1 keeps track of the actual time in hours, minutes and seconds and controls supplemental HID lighting.
- Page 6 If the temperature rises above the level you output will be turned On. The Lights Off output will remain On until the set, the temperature probe mounted outside the HID-1 will sense the area next scheduled On cycle occurs and then the unit will return to normal is getting to hot and disable the Light On outlet.
Need help?
Do you have a question about the HID-1 and is the answer not in the manual?
Questions and answers