Advertisement
Section 3 Installation
Here we simply take ARS-2160 to demonstrate.
1. Remove the 6 screws of ARS-2160 and open the upper case.
2. Slide the 2.5'' SATA hard drive along the sides of ARS-2160 till it connects CN16.
3. Fix the SATA hard drive to the two sides of ARS-2160 with the enclosed 4 screws.
4. Return the upper cover of the bridge and fix with the 4 screws.
5. Set the jumper, and connect ARS-2160 to SCSI host controller via a SCSI cable. Then provide
power to ARS-2160 with a 4-pin power core.
Advertisement
