Table of Contents
Advertisement
Noise displays./Subject's movements are irregular.
Camera automatically
lightened the image
displayed on the LCD
monitor to make it easier
to see when shooting in
a dark area (p. 21).
Shooting
Camera will not record.
Mode switch is set to
(playback).
Flash is charging.
Memory card is full.
Memory card is not
formatted correctly.
SD memory card is write
protected.
Image Seen in Viewfinder vs. Recorded Image
Usually the recorded
image contains more of
the scene than is seen in
the viewfinder.
There is no effect on the recorded
image.
Set the mode switch to
(Movie) (Basic Guide p. 6).
When charging is complete, the
indicator will light orange and you
are free to start shooting (p. 26).
Insert a new memory card (Basic
Guide p. 2).
If required, download the images to
a computer and erase them from the
memory card to make space.
Format the memory card (p. 28).
If reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest
Canon Customer Support Help
Desk.
Slide the write protect tab of the SD
memory card upward (p. 121).
Confirm the actual image size with
the LCD monitor. Use the LCD
monitor when taking close-up shots
(p. 19).
(Rec.) or
107
Advertisement
Table of Contents
