Download Print this page
KING U2425 Installation Instructions

KING U2425 Installation Instructions

Utility heater

Advertisement

Quick Links

electrical mfg. company
UTILITY HEATER
Protect your equipment
ing this unit where protective warmth is required. This versatile utility
heater will save you time and money by preventing the costly inconve-
nience of frozen pipes and equipment in your pump room, valve room,
utility room, etc. With the automatic thermostat you set the required
temperature to be maintained. Low wattage units can be used in electri-
cal cabinets for moisture control and to maintain a minimum operating
temperature to provide high reliability of electronic equipment.
Model for
WATTAGE
120V
62
U2425**
125
U2450**
187
U2475**
250
U24100**
500
U1250
750
U1275
1000
U12100
* cubic foot cabinet
** 240 Volt unit run at 120 Volts
Clearances from combustible surfaces
Low Wattage Clearances from combustible surfaces - for 62 Watts to 187 Watts
Maximum wattage for vertical installation is 250 Watts. Do not exceed 250 Watts with this installation.
9131 10th Avenue South, Seattle WA 98108 (206) 762-0400 fax (206)763-7738
from destructive freezing by install-
Model for
ROOM SIZE
240V
(cubic feet)
N/A
5*
N/A
10*
N/A
15*
U2425
20
U2450
38
U2475
50
U24100
75
FEATURES
• Thermostat has range of 40º to 90ºF
• Steel sheath long life element
• Expanded metal element shield
• 4 mounting feet
• Capillary tube safety high limit
• Steel case and grille
• Optional stainless steel case and grille
• Baked enamel ivory finish
• ½" knockout for electrical hookup
• 1-year warranty
VERTICAL
ON WALL
(Thermostat Up)
DO NOT INSTALL THIS WAY
U.indd : 1/10

Advertisement

loading

Summary of Contents for KING U2425

  • Page 1 ROOM SIZE • Thermostat has range of 40º to 90ºF WATTAGE 120V 240V (cubic feet) • Steel sheath long life element U2425** • Expanded metal element shield U2450** • 4 mounting feet U2475** • Capillary tube safety high limit U24100** U2425 •...
  • Page 2: Installation Instructions

    Installation Instructions It is extremely important to verify the electrical power supply is the same voltage as the heater you are installing. 120 Volt heaters are usually not interchangeable with 240 Volt power supply. Powering a 240 Volt unit with 120 Volt supply wires will reduce the heater output by approximately 75% which may be undesirable for your application.

This manual is also suitable for:

U2475U2450U24100U1250U1275U12100