Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2
Press the " I " button (On/Off) on the front of the television.
Result:
The Standby indicator on the front of the television
lights up.
3
Press the POWER ( ) button on the remote control to switch the
television on.
Result:
The programme that you were watching last is re-
selected automatically.
➢
◆ If your television isn't turned on when the POWER ( )
button is pressed, press the SELECT button to check if
the "TV" mode has been chosen.
◆ If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on
page 22 or "Storing Channels Manually" on page 24.
4
To switch your television off, press the " I " button (On/Off) again.
TV
English - 13