Advertisement
Quick Links
© Panduit Corp. 2016
(1) Switch Ducting
(with hinged perforated door)
For Technical Support: www.panduit.com/resources/install_maintain.asp
Modular ToR Switch Inlet Duct
(CDE3)
INSTALLATION INSTRUCTIONS
Component Guide
(1) Switch Support Bracket
Page 1 of 6
Cisco Nexus 3900 Series Switch
(reference)
CDE3
(installed in Net-Access
Server Cabinet)
TOOL LIST
#2 Philliips Screwdriver
5/16" Socket Wrench
3/8" Socket Wrench
1/4" Socket Driver
(2) Chassis Side Bracket
V00029KB
(1) Hardware Kit
(not shown)
Advertisement
Related Manuals for Panduit CDE3
Summary of Contents for Panduit CDE3
- Page 1 Modular ToR Switch Inlet Duct (CDE3) INSTALLATION INSTRUCTIONS V00029KB © Panduit Corp. 2016 Cisco Nexus 3900 Series Switch (reference) CDE3 (installed in Net-Access Server Cabinet) TOOL LIST #2 Philliips Screwdriver 5/16” Socket Wrench 3/8” Socket Wrench 1/4” Socket Driver Component Guide...
-
Page 2: Installation Instructions
Switch Ducting and Switch Support Bracket components of CDE3 require (4) rack spaces for installation. Switch Ducting and Switch Sup- port Bracket are to be installed at the same vertical rack position. CDE3 components are to be installed prior to switch installation and are designed to support the switch. - Page 3 INSTALLATION INSTRUCTIONS V00029KB © Panduit Corp. 2016 Install Switch Ducting Position Switch Ducting so that the perforated door of ducting faces the cold aisle and the mounting holes of Switch Ducting align with cage nuts in equipment rails (installed on page 2). Secure Switch Ducting to equipment rails using (5) #12-24 Phillips screw, (5) #12 External Tooth Washers and (1) hex head grounding screw (green;...
-
Page 4: Install Switch
INSTALLATION INSTRUCTIONS V00029KB © Panduit Corp. 2016 Routing of Switch Power Cable NOTE: Dashed outline of 3 RU Switch is shown for power cord routing reference only. DO NOT INSTALL SWITCH AT THIS TIME. Cabinet and equipment rails are not shown to add clarity to view. - Page 5 INSTALLATION INSTRUCTIONS V00029KB © Panduit Corp. 2016 Install Switch Support Bracket Day 2 Position Switch Supports Bracket with middle support bracket removed. Align the mounting holes of Switch Support Bracket with cage nuts in equipment rails (installed on page 2). Secure Switch Support Brackets to Rear equipment rails using (5) #12-24 Phillips screw, (5) #12 External Tooth Washers.
- Page 6 INSTALLATION INSTRUCTIONS V00029KB © Panduit Corp. 2016 Secure Switch to Switch Ducting NOTE: Top cover of Switch Ducting removed for clarity Center Slots in Chassis Side Brackets with holes located on both sides of the Switch Ducting. Secure Chassis Side Brackets to switch ducting using (4) #12-24 Phillips screw, (4) #12 External Tooth Washer.