Gfci - Dawson DET 300 User Manual

GFCI


Always test on a known good circuit before use.

Press the test button on the installed GFCI that you
are testing. If it does not trip, do not use the circuit
and consult and electrician. If it does trip, reset the
GFCI.

Plug the tester into GFCI outlet. If the indicator
lights do not indicate a correctly wired outlet, the
GFCI test will not work; consult an electrician
before using.

Press the test button on the top of the tester for at
least 6 seconds. The indicator lights should turn off
and the GFCI should trip.

If the tester does not trip the GFCI, the GFCI is
inoperable; consult an electrician.
4