WA Production Sphere Delay Manual page 3

 The Signal from the left and the right input channels are summed up before
entering the delay unit.
 Inside the delay unit the signal flow is changing according to the delay mode
selected.
 The delayed signal is then entering the stereo linked filter which include
saturation at the exit (the louder the signal the more saturation it gets).
 From the filter out back into your DAW.
Parameters Behavior

Click on any knob to see its value.

Double click any knob to reset it to its default state (especially useful for
envelope follower knobs).
Installation
 Make sure to first remove any previous or demo version you might have.
 Click the installation file and follow the directions.
Requirements
 Windows 7 or higher (32 / 64 bit)

Mac OSX 10.5 or higher (32 / 64 bit)
 AAX - ProTools 11 or higher