Table of Contents
Advertisement
6. Monitoring via Mobile Devices
The iAir App can be used to monitor real-time data of CO/CO
level, temperature and
2
humidity anywhere and anytime without any complicated configuration. The DL-300
modules and your mobile devices such as smart phones or tablets need be addressed
on the same network, and then you can get the real-time data from DL-300 loggers by
entering a specific IP address, or by performing an automatic search for available
devices.
If a DL-300 can not be searched in the iAir App, please contact with the network
administrator to make sure the module and your mobile devices are addressed on the
same sub-network. It means that they have the same broadcast address.
The iAir app is available to free download in Google Play and App Store. Search "iAir" in
or search "iAir", "ICPDAS" in App Store and tap on install.
The iAir user manual can be obtained from
http://ftp.icpdas.com/pub/cd/usbcd/napdos/dl-300/document/
DL-300 Data Logger User Manual
Version 1.1.0 Aug. 2015
- 56 -
Advertisement
Table of Contents
