Ethernet - ICP DAS USA DL-301 User Manual

Change Logging: Sets the mode for data logger
- Stop: stops logging data (default)
- Run: logs data continuously
- Period: logs data in the period of specified time
Overwrite on Full: Sets whether to overwrite old data by new ones when the memory
for data storage is full. (Over the upper limit of 450,000.)
- No: discards the new data (default)
- Yes: overwrites the old data by new ones
Sampling Interval: Sets the time interval for logging data. It is valid for both Run mode
and Period mode. Tap the Sampling Interval to enter the sub-menu.
Default: 10 (unit: seconds)
Period Start: Sets the start time for Period mode
Default: date: 2014/06/01, time: 00: 00 : 00
Period End: Sets the stop time for Period mode
Default: date: 2014/06/02, time: 00: 00 : 00
Save: Saves the modification and returns to the Settings menu.
All the changes take effect immediately after saving changes.
Skip: Returns to the Settings menu without saving any changes.

3.5 Ethernet

Tap the Ethernet item in the Settings menu to enter the sub-menu.
DL-300 Data Logger User Manual Version 1.1.0 Aug. 2015
- 23 -