Picture Mode - Samsung 2AE0 Owner's Instructions Manual

Setup - Child lock
(depending on the model)
This feature allows you to prevent
TV
unauthorized users, such as
Child Lock
Channel
children, from watching unsuitable
Lock
programs by muting out video
and audio. Child Lock cannot be
released using front panel buttons.
Only remote control can release
Move
the Child Lock setting, so keep
the remote control away from children.
 Child lock: on/off
You can activate or deactivate the Child Lock function.
 Channel: Channel number to be locked.
 lock: When press the ENTEr button, the Locked is
displayed.
➢
If any channel is locked, you can not access to the
"Channel" and "Child Lock" menu by using the control
buttons on the TV panel (the "Not Available" is displayed
in the "Child Lock" menu). You can access by using the
remote control only.
Picture - Mode
 Mode:
Child Lock
: On ► Dynamic / Standard / Movie
: P 1
/ Custom
: ?
You can select the type
of picture which best
corresponds to your viewing
requirements.
Enter Return
 Contrast / Brightness /
Sharpness / Color / Tint (NTSC only)
The TV has several settings which allow you to control the
picture quality.
 Color Tone: Cool2 / Cool / Normal / Warm / Warm2
You can change the color of the entire screen according to
your preference.
 reset
You can retum to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Digital Nr / DNIe Jr
(depending on the model)
 Digital Nr
If the signal received by the
television is weak, you can
activate this feature to reduce
any static and ghosting that
may appear on the screen.
 DNIe Jr
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Mode
TV
Mode : Dynamic ►
Contrast : 100
Brightness : 50
Sharpness : 75
Color : 50
Tint : G 50 R 50
Colour Tone : Cool1 ►
Reset ►
Move Adjust Return
Picture
TV
Mode : Dynamic ►
Digital NR : Off ►
DNIe Jr : Off ►
Move Enter Exit
English - 6
Sound -
Mode / Equalizer / MTS / Auto Volume /
Pseudo Stereo /Turbo Plus / Half Mute
 Mode: Standard/Music/
TV
Mode
Movie/Speech/Custom
Equalizer
You can select the type of
MTS
Auto Volume
special sound effect to be
Pseudo Stereo
used when watching a given
Turbo Plus
Half Mute
broadcast.
Move
 Equalizer
The television has several settings which allow you to
control the sound quality.
➢
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
 MTS (Multi-channel Television Sound)
Depending on the particular program being broadcast, you
can listen to Mono, Stereo, or SAP.
➢
Press the MTS button on the remote control
repeatedly to select "Stereo", "Mono", or "SAP"
(Secondary Audio Program).
 Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
 Pseudo Stereo
This feature converts a monaural sound signal into two
identical left and right channels. Once the "Pseudo Stereo"
is set to "On" or "Off", the setting applies to the sound
effects such as "Standard", "Music", "Movie" and "Speech".
Turbo Plus
◆
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Half Mute
◆
You can reduce volume to half and control volume even in
the mute mode.
➢
When you click the "mute" button once to activate Half
Mute see half mute ( ) on screen, twice for Full Mute
see full mute icon ( ) on screen.
➢
You can also use the EZ.VIEW button to use this function.
Method:
ENTEr : On/Off
Sound
: Standard ►
►
: Stereo ►
: Off ►
: Off ►
: Off ►
: On ►
Enter Exit