Samsung 2AE0 Owner's Instructions Manual page 3

Setup - Plug & Play
(depending on the model)
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
 Press the PoWEr button on
the remote control.
The message "Plug & Play"
is displayed. It flickers for a
little while and then Language
menu is automatically
displayed.
Language
2 Press the ▲ or ▼ button to
English
Español
select the language, then
Português
Français
press the ENTEr button. The
message "Check antenna
input" is displayed.
Move
➢
If any language is not
selected, the language
menu will disappear
Check antenna input.
about 30 seconds later.
Enter
3 Make sure that the antenna is
Auto Program
connected to the TV.
Press the ENTEr button,
then the "Auto Program" is
displayed.
Enter
4 Press the ENTEr button to
Auto Program
Air 3
select "Start". The TV will
begin memorizing all of the
available channels. Press the
ENTEr button to stop.
Enter
5 After all available channels
are stored, the "Clock set" is
displayed. Press the ENTEr
button. Press the ◄ or ►
Plug & Play
button to move to the hour
Start Plug & Play
or minute. Set the clock by
OK
pressing the ▲ or ▼ button.
Enter Exit
6 When you have finished,
press the MENU button.
Plug & Play
The "Enjoy your watching."
is displayed and then the
channel which has been
stored will be activated.
➢
Plug & Play feature doesn't work in the AV mode,
and then the channel which has been stored will be
Enter Skip
activated.
Plug & Play
OK
Re-setting the Plug & Play
Skip
Method:
MENU  ▲/▼ (Setup) 
ENTEr  ▲/▼ (Plug & Play) 
Plug & Play
ENTEr
0%
Start
Skip
Plug & Play
102MHz
7 %
Stop
Skip
continued...
Plug & Play
Clock Set 12:00 am
Move Enter
Adjust Skip
Enjoy your watching.
OK
Setup
TV
Plug & Play ►
Language : English ►
Time ►
Caption : Off
Child Lock ►
Blue Screen : On ►
Melody : On ►
Music Mode : Off ►
Move Enter Return
English - 3
Input - Source list
 Source list
TV
You can switch between
TV
AV1
viewing signal from connected
AV2
equipment, such as a VCR, Component
DVD, set-top box, and the TV
source (broadcast or cable).
➢
Press the SoUrCE
Move
button on the remote
control repeatedly to select the desired signal source.
Source List
Enter Return