Powersaver - Samsung SyncMaster 943SW User Manual

Dimensions (W x H x D) / Weight (HAS Stand)
443.0 x 342.8 x 190.2 mm ( 17.4 x 13.5 x 7.5 inch) (With Stand)/ 4.85 kg (10.7 lbs)
VESA Mounting Interface
75.0 mm x 75.0 mm
Environmental considerations
Operating
Storage
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interac-
tion of the monitor and the computer systems will provide the best operating
conditions and monitor settings. In most cases, the monitor installation will proceed
automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT-LCD panels manufactured by using advanced semiconductor technology with
precision of 1ppm (one millionth) above are used for this product. But the pixels of
RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some
black pixels may be seen. This is not from bad quality and you can use it without
any problems.
For example, the number of TFT-LCD sub pixels contained in this product are
3,133,440.
Note
Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use
and can be used in all areas including common residential areas. (Class B equipment emits
less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves
energy by switching your monitor to low-power mode when it has not been used for a certain
amount of time. The monitor automatically returns to normal operation when you press a key
on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or
when leaving it unattended for long periods. The PowerSaver system operates with a VESA
DPM compliant video card installed in your computer. Use the software utility installed on
your computer to set up this feature.
State
Power Indicator
Power Con-
sumption
Specifications
Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing
Temperature : -4°F ~ 113°F (-20°C ~ 45°C)
Humidity : 5 % ~ 95 %, non-condensing
Normal Operation Power saving
On
Less than 20 watts Less than 1 watts
128
Power off (Power button)
mode EPA/ENERGY 2000
Blinking
Less than 1 watts
Off