Acoustic Energy AE1 Classic Specifications

Specifications
Bass/Mid Driver:
110mm ceramic sandwich aluminium cone.
32mm edge-wound voice-coil. Magnetically shielded.
Tweeter:
25mm magnesium alloy dome. Magnetically shielded.
Crossover:
Symmetrical third order at 3kHz.
Power Handling:
Compatible with amplifiers rated at up to
200 Watts into 8 Ohms
Frequency Response:
70Hz - 22kHz ±3dB
The original AE1 built up a loyal band of well known users -
studios, musicians, engineers and broadcast organisations.
A few examples:
Abbey Road Studios, Air Studios, Alchemea, Alleycats, Bad Earth
Studios, Beulah Studios, Billy Ocean, Boomerang Sounds,
Brownhill Studios, Channel 4 Television, DEP International Ltd.,
Domaine Productions, EAR Productions, Fairground Attraction,
Goldsmiths College, Hoxton Studios, ICC Studios, James Taylor,
Mick Hucknall, Kevin Maloney, Polygram / Island Music, Paragon,
Parkgate Studio, Red Bus Studios, Radio Norwood - Holland,
Redwood Studios, Roger Waters Music UK Ltd., Rollover
Studios, Seal, Strongroom, USDF Productions, UB40,
Virgin Records Ltd., Whitfield Street Studios.
ACOUSTIC ENERGY LIMITED
16 Bridge Road, Cirencester, Gloucestershire, England GL7 1NJ
Telephone: 01285 654432 Facsimile: 01285 654430 Email: info@acoustic-energy.co.uk
www.acoustic-energy.co.uk
Sensitivity:
88dB for 2.83V at 1m
Nominal Impedance:
8 Ohms
Total Harmonic Distortion:
Typically less than 0.3%, 200Hz to 20kHz
Power Compression:
Less than 1dB for 16dB gain at 250Hz
Dimensions (H x W x D):
295 x 180 x 255mm
Weight (single speaker):
8kg
Compact Nearfield Monitor
I n n o v a t i o n P e r f o r m a n c e
R e f e r e n c e S e r i e s
AE1 Classic
Q u a l i t y V a l u e